The M3864 unit was developed to deal with the many unusual situations faced by rescue organisations around the world.
Designed to spread and lift, the M3864 comes with a spreader, its own buoyancy float, a hydraulic hose combined with an electric service handle and a hydraulic power unit.
Wether with motor vehicles, ships, aircrafts, etc. this spreader will help you through any land, watery and underwater extrication operations.
The ME4 spreader has its own Mstab float, keeping its own mobility and neutral buoyancy and leaving the diver free of any weight. When used from a distance, the spreader maintains its neutral buoyancy even after spreading or lifting, giving the operator and the equipment full safety. The Mpower hydraulic power unit with the T360 technology feeds the ME4 spreader, works in any positions and has neutral buoyancy. The integrated and re-loadable battery provides 45 minutes of working autonomy.
A combined 2 m – 6 ft hydraulic hose and electric service handle connects the hydraulic power unit to the spreader and can be used to power the Mpower from the tool. For safety reasons, it might be necessary, to loosen the service handle from the tool and use it as a cabled remote to spread or lift from a distance.
The standard distance between the operator and the spreader is 4 m – 13 ft. If a longer distance is required, we can provide an additional 4 m – 13 ft dual hydraulic hose/ electric service handle, providing an 8 m – 26 ft safe spreading distance from the working tool.
Note that if you own, as well as as well as the ME4 spreader or the Mseries cutters, the MU400 cutter or the MVT5 jack, you can use either tool with the Mpower and use them one after the other. To do so, disconnect the service handle from the tool you are using and connect it to the required tool, you can proceed both on land and underwater.