rollover to zoom

M3863

The M3863 unit was developed for atypical breaching situations faced by the operation’s teams of the Police and Army.

Designed to cut through all kind of material the M3863 commes with a cutter, its own buoyancy float, a hydraulic hose combined with an electric service handle and a hydraulic power unit.

Different models are available from the Mseries cutters: short curved blades MBP40 & long curved blades MBPL40, short straight blades MLD40 & long straight blades MLDL40 and the U shape blades MU400.

Whether with motor vehicles, ships, aircrafts etc, these cutters will help you through any land, watery and underwater breaching operations.

Each cutter has its own Mstab float, keeping its own mobility and neutral buoyancy and leaving the diver free of any weight.

When used from a distance, the cutter maintains its neutral buoyance even after cutting, giving the operator and the equipment full safety. The Mpower hydraulic power unit with the T360 technology feeds all of the Mseries cutters, works in any positions and has neutral buoyancy. The integrated and re-loadable battery provides 45 minutes of working autonomy.

A combined 2 m – 6 ft hydraulic hose and electric service handle connects the hydraulic power unit to the cutter and can be used to power the Mpower from the tool. For safety reasons, it might be necessary, to loosen the service handle from the tool and use it as a cabled remote to cut from a distance.

The standard distance between the operator and the cutter is 4 m – 13 ft. If a longer distance is required, we can provide an additional 4 m – 13 ft dual hydraulic hose/ electric service handle, providing an 8 m – 26 ft safe cutting distance from the working tool.

Note that if you own, as well as the Mseries cutters, the MU400 cutter or the ME4 spreader, you can use either tool with the Mpower and use them one after the other. To do so, disconnect the service handle from the tool you are using and connect it to the required tool, you can proceed both on land and underwater.