rollover to zoom

M3863/64/65

The M3863/64/65 unit was developed to deal with the many unusual situations faced by rescue organisations around the world.

Designed to cut, spread, lift and push, the M3863/64/65 comes with a cutter, a spreader and a jack, their own buoyancy float, a hydraulic hose combined with an electric service handle and a hydraulic power unit.

Wether with motor vehicles, ships, aircrafts, etc. this multi-tool unit will help you through many extrication operations.

Within the cutters’ range, Four different models are available from the Mseries cutters : short curved blades MBP40 & long curved blades MBPL40, short straight blades MLD40 & long straight blades MLDL40 and the U shape blades MU400.

The cutters, whether with curved or straight blades, have a 400 kN power, allowing to cut, among others, metal bars up to 22 mm – 1 inch diameter.

The spreader, with a 40 kN power and an opening of 300 mm – 12 inch, is often used to create a passage between metal sheets, bars, etc. Its high resistance notched nozzles make it an ideal lifting tool.

The telescopic jack, with its 100 kN maximum power is usually utilized to spread, push or lift but can also be used to shore or stabilize heavy loads.

All our tools have safety hydraulic valves to connect or disconnect freely when bearing charge.
Each cutter, as well as the spreader and the jack, has its own Mstab float, keeping its own mobility and neutral buoyancy and leaving the diver free of any weight. When used from a distance, either tool maintains its neutral buoyancy even after cutting, spreading, lifting or pushing giving the operator and the equipment full safety.
The Mpower hydraulic power unit with the T360 technology feeds the Mseries cutters or the MU400 cutter, and the ME4 spreader, works in any positions and has neutral buoyancy. The integrated and re-loadable battery provides 45 minutes of working autonomy. A combined 2 m – 6 ft hydraulic hose and electric service handle connects the hydraulic power unit to the cutter or spreader and can be used to power the Mpower from the tool.
The standard distance between the operator and the tool is 4 m – 13 ft. If a longer distance is required, we can provide an additional 4 m – 13 ft dual hydraulic hose/ electric service handle, providing an 8 m – 26 ft safe cutting/spreading/lifting/pushing distance from the working tool.

You can use either tool with the Mpower and use them one after the other. To do so, disconnect the service handle from the tool you are using and connect it to the required tool, you can proceed both on land and underwater.

DATA SHEET (AVAILABLE SOON)